When the steam ironing system is
switched on, press the button on
the control panel.
The settings menu will be displayed.
Use the arrow buttons to select
individual settings.
Confirm your choice by pressing the
OK button.
Select the Start descaling option.
Confirm your choice by pressing the
OK button.
The descaling process will now start.
Descaling process
The following display messages will
guide you through the entire descaling
process. Only proceed with the
required action if you are prompted to
do so by the appropriate message in
the display.
Detach hose
Remove the steam hose of the iron or
the steamer from the steam
connection on the tower.
The iron or the steamer must not be
attached to the steam connection
during the entire descaling process.