Cleaning and care
52
Fill water container to mark
Hold the water container by its
handle.
Pull the handle downwards.
The water container is released from the
retainer.
Pull the water container upwards and
out.
When removing the water container,
you may notice some water dripping
while the water container valves are
closing.
Tip: The dripping can be prevented by
removing the water container slowly.
After removing the water container, the
message Add descaler will appear in
the display.
Add descaler
Turn the screw cap at the back of the
water container anti-clockwise and
remove the cap.
Level mark on the water container
Use fresh tap water to fill the water
container (water temperature approx.
15 to 35°C) to the level marking line.
It is important not to use more or less
water to fill the water container.
Add 1 descaling tablet to the water
container.
Replace the screw cap on the water
container.
Turn the screw cap clockwise as far
as it will go.
The screw cap is now closed.
To Next Page
Loading...
Need help?
General
