Power cord
The power cord is wound around a
hook underneath the ironing table.
^ Unwind the cord.
,
Do not insert the plug into the
electrical socket yet.
* The plug shown is for illustration only.
Dust cover
The dust cover which protects the roller
during transportation must be removed.
^ First remove the feed board by lifting
it out of the right hand holder, then
pull it out to the left of the roller.
^ Plug the appliance in and turn it on.
The heater plate will rise
automatically.
^
The protective dust cover can now
be pulled off.
Before using for the first time
10
To Next Page
Loading...
Need help?
General
