Pants
Ironing pants and jeans
^
Iron the upper part from waistband to
inseam of pants and jeans in
sections. Set on a slow speed.
^
Iron the legs from hem to inseam one
leg after another.
Pressing woolen and dress pants
^ Lay the pant legs separately on the
roller. Let the upper part hang down
over the left hand edge of the roller.
^
Cover with a damp cloth. Then turn
the roller by hand until the part of the
pants to be pressed is covered by
the heater plate.
^
Press each leg from both sides
starting from the crease.
Skirts
These are best ironed without the feed
board.
^
Pull the skirt over the roller from the
hem to the waistband.
^
Lay a damp cloth over it.
^
Iron each section of the skirt in turn.
Ironing Tips
25
To Next Page
Loading...
Need help?
General
