4. Back
^ Start at the side seam. Pull the shirt
over the roller as far as the arm hole.
Smooth it out.
^ Starting from the side seam iron past
the armhole, then pull the shirt further
onto the roller and iron the full back
length to the second arm hole.
^
Pull the shirt further down the roller
and iron past the arm hole.
5. Cuffs and sleeves
^ First iron both sides of the cuff on the
left edge of the roller. Fold
double-cuffs with one button hole
placed over the other one and press
lightly.
^ Smooth out the sleeve and place it on
the edge of the roller.
^
Iron the arm from the edge of the cuff
to the underarm. Shift diagonally to
iron the full width of the arm hole.
Ironing Tips
24
To Next Page
Loading...
Need help?
General
