The appliance is supplied with a power
cord and NEMA 5-15 P plug ready for
connection to an a.c. single phase
120 V 60 Hz supply (see data plate).
The fuse rating is 15 amps.
,
Do not modify the machine
power cord or plug, the machine is
approved for USA and CDN.
All electrical work should be carried
out by a qualified electrician in
accordance with local and national
safety regulations.
Do not connect the rotary iron to an
extension cord. Extension cords do
not guarantee the required safety of
the appliance (e.g. danger of
overheating).
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
32
To Next Page
Loading...
Need help?
General
