Positioning the laundry
^
Arrange the laundry items on the
feed board so that they are straight
and then smooth out.
^ Then turn the roller by hand, always
keeping your hands away from the
heater plate, so that the edge of the
item to be ironed can be held by the
heater plate.
^ Press down the foot pedal.
Removing the feed board
The feed board can be removed when
shaped garments are being ironed,
e.g. skirts (round).
^ Lift the feed board out of the right
hand holder and then pull it out to the
left of the roller.
Laundry bar
Ironed laundry can be hung over the
swing out bar to avoid creasing.
,
Take care not to press down on
the bar when it is swung out, this
could cause the rotary iron to tip
over.
Ironing
18
To Next Page
Loading...
Need help?
General
