,
The ironing cover should only be
changed when the appliance is
cold.
^
Remove the feed board.
^ Untie the old ironing cover cords at
each end of the roller.
^
Unwind the old ironing cover.
When the iron is turned on, the
heater plate heats up immediately.
The temperature selector must be
turned to the g setting.
^
Completely unwind the padding
cover attached to the roller and let it
hang down smoothly.
^
Hold the corners of the padding
cover, pull taut and keeping taut lay
over the heater plate.
The slot which holds the ironing
cover is now at the top.
Cleaning and Care
27
To Next Page
Loading...
Need help?
General
