Miele CM 5710 User Manual

Before using for the first time
19
Before using for the first time
 Remove any labels from the machine.
 Remove the protective foil from the
drip tray cover and place the drip tray
cover into the lower panel.
 Place the coffee machine on a level
flat surface that is not sensitive to
water (see “Installation”).
Clean the coffee machine thoroughly
(see “Cleaning and care”) before
filling it with water and coffee beans.
 Insert the plug of the coffee machine
into the socket.
 Remove the water container and fill it
with fresh, cold tap water. Only fill the
water container up to the “max.”
marker and then refit it in the
machine.
 Take the lid off the coffee bean
container, fill it with roasted coffee
beans and replace the lid.
Tip: The milk pipework can be stored
behind the appliance door when not in
use.
Switching on for the first time
 Touch the On/Offbutton.
The welcome message Miele –
Wilkommen will appear on the display
briefly.
 Use the arrow sensors to
highlight the required language.
Touch OK.
 Then select the country if necessary
and touchOK.
The setting is now saved.
The coffee machine is now successfully
set up for use.
 Confirm withOK.
The coffee machine heats up and rinses
the pipework. The water used for
rinsing will run out of the central spout.
 Before preparing milk for the first
time, rinse the milk pipework (see
“Cleaning and care – Rinsing the milk
pipework”).

Miele CM 5710 Specifications

General

Brand	Miele
Model	CM 5710
Category	Coffee Maker
Language	English