Settings
37
Displaying and changing
Settings
The drinks menu is displayed.
Touch the sensor control.
Select Settings and confirm withOK.
Select the menu option that you want
to display or change.
Confirm withOK.
Change the setting as required and
confirm withOK.
Language
You can select the language (and
country variant of that language) for all
display text.
Tip: If you select the wrong language
by mistake, you can find the
“Language” option again via the
symbol.
Timer: switch off after
If none of the sensors have been
touched or no drink has been made, the
coffee machine will switch itself off after
30 minutes to save energy.
You can change this pre-setting using
the arrow sensors to a time of
between 15 minutes and 9 hours.
Eco mode
Eco mode is an energy-saving mode.
The system does not heat up until
someone starts making a drink.
Eco mode is activated by default.
Info (display information)
You can display the number of drinks
dispensed so far and how many more
can be dispensed until the maintenance
programmes have to be run.
System lock
You can lock the coffee machine to
prevent it being used without your
knowledge, by children, for example.
Temporarily deactivating the system
lock
Press and holdOK for 6seconds.
The system lock is reactivated when the
coffee machine is next switched off.
Water hardness
Information regarding water hardness is
given in the “Water hardness” chapter.
Display brightness
Change the display brightness using
the arrow sensors .
Volume
You can set the volume of buzzer and
sensor tones using the arrow
sensors.
Tip: To switch off the tones, touch the
arrow sensor, until no segments are
filled and Switched offappears.
Factory defaults
You can reset the coffee machine to its
factory default settings.