Problem solving guide
58
Unusual performance of the coffee machine
Problem Cause and remedy
The display remains
dark when the coffee
machine is turned on
using the On/Offbut-
ton.
The On/Offbutton was not held for long enough.
Touch and hold the On/Offbutton for at least
3seconds.
The plug is not inserted in the socket correctly.
Insert the plug into the socket.
The fuse has tripped because the coffee machine,
voltage or another appliance is defective.
Switch off at the wall socket and unplug the coffee
machine.
Contact a qualified electrician or the Miele
Customer Service Department.
The coffee machine
turns off suddenly.
The switch-off time programmed using the timer has
been reached.
If required, you can select a new switch-off time
(see “Settings – Timer”).
The plug is not inserted in the socket correctly.
Insert the plug into the socket.
The sensors do not re-
act to touch.
The coffee machine
cannot be operated.
There is an internal fault.
Disconnect the machine from the power supply by
removing the plug from the socket.
The display is hard to
see or not able to be
read.
The display brightness has been set too low.
Change this setting (see “Settings”).
To Next Page
Loading...
Need help?
General
