Cleaning and care
44
Unscrew the cap. Remove the sealing
ring and the filter.
Clean all parts thoroughly. Rinse all
parts carefully under running water.
Then replace the filter (with the cross
facing upwards) and then the sealing
ring. Finally screw the cap back on
tightly.
Push the water container back into
the machine.
Central spout
Clean the central spout’s stainless
steel cover by hand only, using
warm water and a little washing-up
liquid.
All other parts are dishwasher-safe.
Carefully pull the stainless steel cover
off.
Pull the dispensing unit down to
remove it.
To Next Page
Loading...
Need help?
General
