Cleaning and care
52
Drip tray and waste container
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container.
Danger of burning!
If the rinsing process has just
finished, wait a while before
removing the drip tray as the water
used for rinsing will run out of the
coffee spouts.
Push the central spout up as far as it
will go.
Then pull the drip tray carefully out of
the machine. Take the lid off.
Empty the drip tray and the waste
container.
Remove the drip tray cover and
the lower panel.
Clean all parts thoroughly.
Clean the lower panel by hand only
using warm water and a little
washing-up liquid.
All other parts are dishwasher safe.
Clean the inside of the machine
underneath the drip tray.
Reassemble all parts and place the
drip tray back in the coffee machine.
Make sure that the drip tray is pushed
right into the coffee machine as far as
it will go.
To Next Page
Loading...
Need help?
General
