EasyManuals Logo
Home>Miele>Vacuum Cleaner>Complete C2 Flex

Miele Complete C2 Flex User Manual

Miele Complete C2 Flex
Go to English
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
en
37
a AirClean
b AirClean Plus50 (light blue)
c Active AirClean50 (black)
d HEPA AirClean50 (white)
If your vacuum cleaner is fitted with ex-
haust filter c or d, you need to activate
the timestrip® filter change indicator.
Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (Fig. 10).
Remove the indicator strip (Fig. 11).
Press the timestrip® filter change in-
dicator(Fig. 12).
After approx. 10–15seconds, a thin red
line will appear in the left-hand side of
the display (Fig. 13).
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the timestrip® filter change in-
dicator works
The timestrip® filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50oper-
ating hours the display will be com-
pletely filled with red (Fig. 14). 50oper-
ating hours equates to approximately
one year of use.
Using the supplied accessories
(Fig. 15)
Crevice nozzle
Dusting brush
Upholstery nozzle
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
- AllergoTeQ floorhead
- Turbobrush
These are supplied with their own oper-
ating instructions.
Removing accessories (Fig. 16)
Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
Take out the accessory you require.
Press down firmly on the lid to close
it.
Use
Adjusting the floorhead
(Fig.17,18+19)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the floorheads illustrated.
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard floors.
Miele offers a range of other floorheads,
brushes and accessories for other types
of flooring and special applications (see
“Optional accessories”).
Please observe the flooring manu-
facturer’s cleaning and care instruc-
tions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele Complete C2 Flex and is the answer not in the manual?

Miele Complete C2 Flex Specifications

General IconGeneral
Vacuum brushes includedUniversal brush
Upholstery nozzle includedYes
Power sourceAC
AC input voltage220-230 V
Maximum input power890 W
Annual energy consumption22.7 kWh
TypeCylinder vacuum
Hose length2 m
Cleaning typeDry
Dust capacity4.5 L
Product colorBlack
Dust container typeDust bag
Proper useHome
Noise level80 dB
Cleaning surfacesBare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filteringAir-clean
Dirt separating methodFiltering
Cord length6.5 m
Weight and Dimensions IconWeight and Dimensions
Depth275 mm
Width487 mm
Height227 mm
Weight6900 g
Package width590 mm
Package height380 mm
Package weight9600 g

Related product manuals