Miele Complete C2 Flex User Manual

en
44
Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you rectify faults yourself can be found at www.miele.com/ser-
vice.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.
Problem Cause and remedy
The vacuum cleaner
switches off automatic-
ally.
A temperature limiter switches the vacuum cleaner
off automatically if it gets too hot.
This can occur if, for instance, large articles block the
suction tube or when the dustbag is full or contains
particles of fine dust. A heavily soiled exhaust or dust
compartment filter can also be the cause of over-
heating.
 Switch the vacuum cleaner off immediately using
the On/Off foot control . Switch off at the wall
socket and unplug it.
After removing the cause, wait for approximately 20 -
30minutes to allow the vacuum cleaner to cool
down. It can then be switched on again.

Miele Complete C2 Flex Specifications

General

Vacuum brushes included	Universal brush
Upholstery nozzle included	Yes
Power source	AC
AC input voltage	220-230 V
Maximum input power	890 W
Annual energy consumption	22.7 kWh
Type	Cylinder vacuum
Hose length	2 m
Cleaning type	Dry
Dust capacity	4.5 L
Product color	Black
Dust container type	Dust bag
Proper use	Home
Noise level	80 dB
Cleaning surfaces	Bare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filtering	Air-clean
Dirt separating method	Filtering
Cord length	6.5 m

Weight and Dimensions

Depth	275 mm
Width	487 mm
Height	227 mm
Weight	6900 g
Package width	590 mm
Package height	380 mm
Package weight	9600 g