EasyManuals Logo
Home>Miele>Vacuum Cleaner>Complete C2 Flex

Miele Complete C2 Flex User Manual

Miele Complete C2 Flex
Go to English
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
en
39
Opening the air inlet valve (Fig. 25)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other textile flooring being sucked into
the vacuum cleaner.
Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to man-
oeuvre.
During vacuuming
When vacuuming, pull the cleaner be-
hind you on its wheels. You can stand
it upright for vacuuming stairs and
curtains etc.
Setting down, transportation
and storage
Park system for pauses during vacu-
uming (Fig. 26)
The Park system allows you to conveni-
ently park the suction tube and floor-
head during brief pauses.
Slot the floorhead into the slot in the
parking attachment.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp,
Retract the telescopic suction tube
fully
Do not use the park system if your
vacuum cleaner has an EasyLock
suction tube.
Park system for storage (Fig. 27 + 28)
Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
After use, switch the appliance off at
the wall socket and unplug it.
Stand the vacuum cleaner upright.
If your vacuum cleaner has a tele-
scopic suction tube, retract the tubes
fully so that it takes up less room for
storage.
Slot the floorhead downwards into
the parking attachment.
If your vacuum cleaner has an Easy-
Lock suction tube, you can detach this
so that the vacuum cleaner requires
less storage space.
Press the release catch on the lower
suction tube section and pull the top
section out.
Push the connection piece attached
to the upper suction tube into the
lower suction tube.
Maintenance
Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
Before carrying out any maintenance
work, switch the appliance off at the
wall socket and unplug it.
The Miele filtration system consists of 3
accessories:
- Original Miele dustbag (type GN)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele Complete C2 Flex and is the answer not in the manual?

Miele Complete C2 Flex Specifications

General IconGeneral
Vacuum brushes includedUniversal brush
Upholstery nozzle includedYes
Power sourceAC
AC input voltage220-230 V
Maximum input power890 W
Annual energy consumption22.7 kWh
TypeCylinder vacuum
Hose length2 m
Cleaning typeDry
Dust capacity4.5 L
Product colorBlack
Dust container typeDust bag
Proper useHome
Noise level80 dB
Cleaning surfacesBare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filteringAir-clean
Dirt separating methodFiltering
Cord length6.5 m
Weight and Dimensions IconWeight and Dimensions
Depth275 mm
Width487 mm
Height227 mm
Weight6900 g
Package width590 mm
Package height380 mm
Package weight9600 g

Related product manuals