Operation
25
Cooking zone controls
The cooking zone controls must not be
turned past B I or BI/II to 0.
Switching on
Fire hazard.
Do not leave the hob unattended
whilst it is being used.
Please note that the heating up time
on an induction hob is very much
shorter than on a conventional hob.
Turn the cooking zone control clock-
wise to the setting you want.
The in-operation indicator will light up.
The residual heat indicator will light up
after a certain temperature has been
reached.
Switching off
Turn the cooking zone control anti-
clockwise to0.
When all cooking zones are switched
off the in-operation indicator will go
out.
Residual heat indicator
If a cooking zone is hot, the residual
heat indicator will light up when it has
been switched off. The residual heat in-
dicator will only go out when the cook-
ing zone is safe to touch.
Risk of burning due to hot cook-
ing zones.
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.
To Next Page
Loading...
Need help?
General
