Safety instructions for installation
38
Risk of damage from incorrect connection.
Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.
Damage from falling objects.
Take care not to damage the ProLine element when fitting wall units or a cooker
hood above it.
Fit the wall units and the cooker hood before the ProLine element.
The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100°C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.
The ProLine element must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.
This CombiSet must not be installed above an oven unless it has
a built-in cooling fan.
After installation, the mains connection cable of the ProLine appli-
ance must not come into contact with any moving kitchen compon-
ent (e.g. a drawer) or be subject to mechanical loads which could
damage it.
Observe carefully the safety clearances listed on the following
pages.
All dimensions are given in mm.
To Next Page
Loading...
Need help?
General
