Using the appliance
22
Selecting a function or
operating mode
The sensor controls for the functions
and operating modes (e.g. Further)
are located above the display (see
“Controls” and “Settings”).
Touch the sensor control for the
desired function.
The sensor control on the fascia panel
lights up orange.
For functions and operating modes:
set values such as the temperature.
Under Further: scroll through the
lists until you reach the desired menu
option.
Confirm withOK.
Changing the function
You can change to another function
during a cooking programme.
The sensor control for the previously
selected function lights up orange.
Touch the sensor control of the new
function or operating mode.
SelectChange function? and confirm
withOK, if required.
The new function appears in the display
with its corresponding recommended
values.
The sensor control for the new function
lights up orange.
Under Further, scroll through the
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are
highlighted.
Touch the or arrow buttons or
swipe to the right or left in the
area until the desired number
is highlighted.
Tip: If you press and hold an arrow
button, the numbers continue scrolling
automatically until you release the arrow
button.
Confirm withOK.
The changed number is now saved.
This will take you back to the previous
menu.
Activating MobileStart
Select the sensor control to
activate MobileStart.
The sensor control lights up. You
can operate your steam oven remotely
with the Miele@mobile app.
Directly operating the steam oven via
the touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the sensor control is lit up.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
