Problem solving guide
114
Problem Cause and remedy
The sensor controls do
not respond.
You have selected the Display| QuickTouch| Off set-
ting. So when the steam oven is switched off, the
sensor controls do not respond.
As soon as the steam oven is switched on, the
sensor controls will respond. If you want the
sensor controls to always respond even when the
steam oven is switched off, select the Display|
QuickTouch| Onsetting.
The steam oven is not connected to the power sup-
ply.
Check that the steam oven power plug is correctly
inserted into the socket.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the On/Off control until the dis-
play switches off and the steam oven restarts.
Noises
Problem Cause and remedy
A humming sound can
be heard during opera-
tion and after switching
off the steam oven.
This noise does not indicate incorrect operation or
an appliance fault. The noise is made by water be-
ing pumped through the system.
The fan can still be
heard after the appli-
ance has been switched
off.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will switch itself off automatically after a while.
A whistling sound is
heard when the appli-
ance is switched on
again.
When the door is closed, the pressure has to equal-
ise, which can cause a whistling sound. This is not
a fault.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
