Settings
40
Remote control
If you have installed the Miele app on
your mobile device, have access to the
Miele@home system and have activated
the remote control function (On), you
can use the MobileStart function and
for example retrieve information about
steam oven cooking processes that are
in progress or end a process that is in
progress.
The steam oven requires max. 2W
when operating in networked standby.
Activating MobileStart
Select the sensor control to activ-
ate MobileStart.
The sensor control lights up. You
can operate your steam oven remotely
with the Miele app.
Directly operating the steam oven
takes priority over operating it via the
remote control function on the app.
You can use MobileStart as long as
the sensor control is lit up.
RemoteUpdate
The RemoteUpdatemenu option is only
displayed and can only be selected if
the requirements for using
Miele@home have been met (see “Be-
fore using for the first time –
Miele@home”).
The RemoteUpdate function is used for
updating the software in your steam
oven. If an update is available for your
steam oven, it will automatically down-
load it. Updates will not be installed
automatically. They must be initiated
manually.
If you do not install an update, you can
continue to use your steam oven as
usual. However, Miele recommends in-
stalling updates.
Activating/deactivating
The RemoteUpdate function is activ-
ated as standard. Available updates will
be downloaded automatically but will
only be installed if you initiate installa-
tion manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
