User programmes
130
You can create and save up to 20 of
your own programmes.
– You can combine up to 9cooking
stages to accurately programme your
favourite or most frequently used
recipes. In each cooking stage, you
can select settings such as the
function, temperature and cooking
duration.
– You can enter the name of the
programme for your recipe.
When you call up and start your
programme the next time, it will run
automatically.
There are different ways of creating a
User programme:
– At the end of an Automatic
programme or Special application,
save it as a User programme.
– After running a programme with a set
duration, save it.
Then name the programme.
Creating a User programme
Select User programmes.
Select Create programme.
You can now specify the settings for the
first cooking stage.
Follow the instructions in the display:
Select and confirm the desired
settings.
If you select the Pre-heatfunction, first
complete the first cooking stage. Use
Add cooking stage to then add another
cooking stage where you set a
cooking duration. Only then can you
save or start the programme.
If required, selectFurther parameters to
switch theBoosterfunction and Crisp
function on or off.
Select Complete cooking stage.
All settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
If additional cooking stages are
required, select Add cooking stage and
proceed as you did for the first
cooking stage.
If you want to check the settings or to
change them at a later date, select the
cooking stage in question.
When you have finished setting all the
cooking stages, select Save.
Enter the programme name.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
