Before using for the first time
33
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
See the “Settings - Water hardness”
for more information.
Set the water hardness level for your
area.
Confirm with OK.
Completing the commissioning
process
Follow any further instructions in the
display.
The appliance is now ready for use.
Cleaning for the first time
Remove any protective foil and
stickers, except the data plate, from
the oven and accessories.
The appliance has undergone a
function test in the factory. Residual
water from this testing may have
trickled back into the cabinet during
transportation.
Cleaning the water container and
condensate container
Risk of injury caused by the
control panel.
You could get caught in the panel as
it opens or closes.
Do not touch the upper edge of the
door when the panel is opening and
closing.
Switch the steam oven on using the
On/Offsensor.
Select the sensor to open the
control panel.
Remove the water container and
condensate container. Remove the
water container and condensate
container by pushing them upwards
slightly as you take them out of the
appliance.
Rinse the water container and
condensate container by hand or in
the dishwasher.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
