Operation
62
Switching Booster on or off for a
cooking programme
If you have selected the Booster| On
setting, you can switch off the function
separately for a cooking programme.
On the other hand, you can also switch
on the function separately for a cooking
programme if you have selected the
Booster| Off setting.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch off the
Boosterfunction for this cooking
programme.
Select the sensor.
Select Booster| Off.
Confirm with OK.
The Boosterfunction is switched off
during the heating-up phase. Only the
heating elements for the selected oven
function are used to pre-heat the oven
compartment.
Pre-heat
You can place most dishes in the cold
oven compartment to make use of the
heat produced during the heating-up
phase.
If you have set a cooking duration, it
will only start to count down when the
target temperature is reached and you
have placed the food in the oven.
Start the cooking programme
immediately without delaying the start
time.
Switching on thePre-heat function
The Pre-heatfunction has to be
switched on separately for each
cooking programme.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch on the Pre-
heatfunction for this cooking
programme.
Select the sensor.
Select Pre-heat| On.
Confirm with OK.
The following message is displayed
with a time: Place food in oven at.... The
oven compartment is heated to the set
temperature.
As soon as you are prompted to do
so, place the food in the oven
compartment.
Confirm with OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
