Installation
*INSTALLATION*
177
IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
Risk of damage caused by incorrect installation.
Incorrect installation can cause damage to the steam oven.
The steam oven must only be installed by a qualified specialist.
The connection data (frequency and voltage) on the steam oven’s
data plate must correspond with those of the electricity supply in or-
der to ensure that no damage can occur to the steam oven.
Compare this data before connecting the appliance. If in any doubt,
consult a qualified service technician.
Power bars and extension cords do not guarantee the required
safety of the appliance (risk of fire). Do not use them to connect the
steam oven to the power supply.
The socket should be easily accessible after the steam oven has
been installed.
The steam oven must be positioned so that you can see the con-
tents of a cooking container placed on the top shelf level. Otherwise
there is a risk of injuries or spillages of hot food.
Note to the installer:
Please leave these instructions with the consumer of the appliance for the local
building inspectors use.
To Next Page
Loading...
