Miele DGC 7640 User Manual

Installation
*INSTALLATION*
186
Installing and removing the
steam oven
For safety reasons, the steam oven
may only be used when it has been
fully installed.
Do not open the door when the
steam oven is on the floor. This could
damage the door.
Do not open the door until the steam
oven has been installed inside the
housing unit.
Maintain the required minimum in-
stallation height of 36" (914mm).
It is vital to observe the connection
data in “Electrical connection” under
“Installation”.
Securing the steam oven in the hous-
ing unit
Risk of damage from incorrect trans-
portation.
Lifting the steam oven by the door
handle could cause damage to the
door.
Use the recessed grips on each side
of the housing to carry the appliance.
The steam generator may malfunc-
tion if the steam oven is not on a
level surface.
The maximum deviation from the
horizontal that can be tolerated is 2°.
 Push the steam oven into the housing
unit and align it in the center of the
housing unit.
When doing so, make sure that the
power cord does not get trapped or
damaged.
 Open the door.
1.
2.
 Insert the mounting aid into the hole
in the front frame.

Miele DGC 7640 Specifications

General

Brand	Miele
Model	DGC 7640
Category	Oven
Language	English