Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware. The rinse aid is
filled in the reservoir and the set
amount will be automatically dosed.
,
Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
When using "2 in 1" or "3 in 1"
detergents, rinse aid is not needed.
Adding rinse aid
^
Press the button in the direction of
the arrow until the flap springs open.
^
Pour liquid rinse aid into the reservoir
until it its visible on the surface of the
screen.
The rinse aid reservoir holds approx.
3.7 oz (110 ml) of liquid.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
To optimize the wash result, the rinse
aid dosage can be adjusted. See
"Settings J - Rinse aid".
Before using for the first time
16
To Next Page
Loading...
Need help?
General
