General problems with the dishwasher
Issue Possible fault Solution
The display remains
off.
The display and the
program selector go
into "Standby" mode to
save energy.
Press any button.
See "Settings J - Standby" for
more info.
The buzzer sounds
during a running
program. The display
shows the following:
Salt container lid
Close
The salt container lid
was not screwed on
properly.
–
Close the salt container lid.
If the salt container lid opened
during a running program,
you should also :
–
Turn the dishwasher off and
on again with the s button.
– Restart the program.
The display shows the
following:
Middle spray arm blocked
or
Lower spray arm blocked
The middle or lower
spray arm is blocked
by dishware.
Open the dishwasher door
and rearrange items blocking
the spray arms.
The spray arm jets of
the middle or lower
spray arm are clogged.
– Turn the dishwasher off s.
Then:
– Clean the spray arms. See
"User Maintenance
Instructions".
Frequently asked questions
51
To Next Page
Loading...
Need help?
General
