Miele G 2 Series User Manual

S etting th e r inse aid d o sag e
The rinse aid dosage can be set from
approx . 0-6 ml. It is set to a
recommended setting of approx . 3 ml
at the factory .
If spots appear on crockery and
glassware:
^
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
^
D ecrease the rinse aid dosage.
^ S witch the dishwasher off with the O ff
button V.
^ P ress the programme selector button
in, and w h ilst h o ld ing it in switch
the dishwasher on using the O n
button U.
K eep the programme selector button
pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^
P ress the Turbo/Tab button three
times.
The Tab indicator light will flash briefly
three times at intervals.
p 3 will flash in the Time display .
This means that the rinse aid dosage
has been set to 3 ml at the factory .
The dosage set will show in the Time
display after the p.
^
U se the programme selector button
to select the rinse aid dosage y ou
want.
The dosage amount alters each time
y ou press the button.
The programmed rinse aid dosage is
now stored in memory .
^
S witch the dishwasher off with the O ff
button V.
B efo re u sing fo r th e first tim e
22

Miele G 2 Series Specifications

General

Brand	Miele
Model	G 2 Series
Category	Dishwasher
Language	English