T u r b o /T ab
The Turbo/Tab button is used for
selecting the Turbo and Tab options.
^
O pen the door.
^
S witch the dishwasher on with the O n
button U.
The O n indicator light U comes on.
^
P ress the Turbo/Tab button
repeatedly until the indicator light for
the option y ou want comes on.
The option selected is active on all
programmes until the setting is
changed.
^ Y ou can now start a programme or
switch the dishwasher off using the
O ff button V.
T u rb o
The "Turbo" function is used to reduce
the duration of programmes in which
this function is available.
In order to achieve optimum cleaning
results consumption rates are
increased with this option.
If a full programme is not y et req uired,
the Turbo function can be used in
conjunction with the Q uick wash
programme to rinse off dirty crockery .
C o m b i tab
To ensure ex cellent results y ou can
programme y our dishwasher for the
ty pe of detergent y ou are using.
The Turbo/Tab button is used for
selecting the Turbo and Tab options.
The programme seq uence and duration
will be adjusted for the ty pe of
detergent selected. D epending on the
programme, the duration can be
considerably longer.
If the Tab indicator does not light up,
the dishwasher is set for standard
detergent.
If the Tab indicator lights up, the
programme seq uence will be adapted
to suit detergents that contain rinse aid
and salt as well as other components
where applicable.
The rinse aid dispenser and the rinse
aid indicator light are deactivated.
S alt consumption for reactivating the
water softener is reduced to
1
/
3
to
1
/
4
of
the normal amount.
D o not select the Tab option if y our
water hardness level is above
3.8 mmol/l or 21° d.
F ollow the detergent manufacturer's
instructions.
The cleaning and dry ing
performance of these ty pes of
detergent can vary enormously .
A d d itio nal fu nc tio ns
39
To Next Page
Loading...
Need help?
General
