Initial commissioning
22
Every dishwasher is tested at the
factory. There will be residual water in
the machine from this test. It is not an
indication that the dishwasher has
been used previously.
Opening the door
In some programs, the door
automatically opens slightly to assist
the drying process.
This function can be deactivated, if
preferred (see “AutoOpen” under
“Settings”).
This dishwasher has a motorized door
opener which is activated by knocking
on the door front (“Knock2open
function”).
Knock twice in quick succession on
the top third of the door front.
The door will open a little.
Hold the door at the top edge and
pull the door out of the lock.
The door locking pins will retract.
To prevent a technical fault, do not
hold the door locking pins firmly
when they are retracting.
If the door is opened during operation,
all functions are automatically
interrupted.
You can deactivate this function (see
“Settings – Knock2open”).
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.
Risk of injury due to door
opening automatically.
The door may open automatically at
the end of a program.
Keep the area around the door free
of obstructions.
To Next Page
Need help?
General
