Frequently Asked Questions
103
Spray arm fault
Problem Possible cause and solution
During the program and
at the end of the
program, the display
shows the following
message:
Check spray arms
The dishwasher does
not turn off at the end
of the program.
The dishware may not
be clean because no
detergent was
dispensed. The
AutoDos function is
automatically
deactivated during the
program sequence.
The lower spray arm is blocked or the nozzles of the
lower spray arm are clogged. The AutoDos function
is automatically deactivated during the program
because the AutoDos detergent outlet cannot be
completely flushed out.
Turn the dishwasher off and back on again.
Messages appear in the display.
Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.
Clean the lower spray arm (see “Cleaning the
spray arms” under “Cleaning and care”).
Select OK to confirm each message.
Start the program again.
To Next Page
Loading...
Need help?
General
