Operation
43
Switching on
Make sure the spray arms can rotate
freely.
Close the door.
Open the stopcock, if it is closed.
Switch the dishwasher on with the
button.
The Start indicator light flashes and the
indicator light comes on next to the
programme selected.
Switch the Memory function on (see
"Programme options, Memory") if you
want the last programme selected to
remain selected instead of the ECO
programme.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
Use the programme selector button
to select the programme required.
The indicator light for the programme
selected will light up.
The programme duration will appear in
hours and minutes in the display.
You can now select programme op‐
tions (see "Programme options").
If any programme options are selected,
the appropriate indicator lights will also
light up.
To Next Page
Loading...
Need help?
General
