Problem solving guide
68
Water drainage fault
Problem Cause and remedy
The dishwasher stops
during a programme.
The Inlet/Drain indica‐
tor flashes.
Fault code shows in
the display.
Before rectifying the problem:
Switch the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
To Next Page
Loading...
Need help?
General
