Caring for the environment
17
Disposal of the packing mate‐
rial
The packaging is designed to protect
the appliance fr
om damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
The packaging consists of the following
mat
erials:
Outer packaging:
– Corrugated cardboard made from up
t
o 100% recyclable material:
or: Polyethylene (PE) shrink wrap
– Polyproplylene (PP) strapping
Inner packaging:
– Chlorine and fluorine free expanded
polystyr
ene (EPS)
– Base, lid frame and support battens
made fr
om untreated natural wood
from renewable forests
– Polyethylene (PE) protective wrap
Recycling the packaging reduces the
use of r
aw materials in the manufactur‐
ing process and also reduces the
amount of waste in landfill sites. Rather
than just throwing these materials
away, please ensure they are recycled.
E
nsure that any plastic wrap‐
pings, bags, etc. are disposed of
safely and kept out of the reach of
babies and young children. Danger
of suffocation.
Disposing of your old appli‐
ance
Electrical and electronic appliances of‐
t
en contain materials which, if handled
or disposed of incorrectly, could be po‐
tentially hazardous to human health and
to the environment. They are, however,
essential for the correct functioning of
your appliance. Therefore, please do
not dispose of your old appliance with
your household waste.
Please dispose of it at your local com‐
muni
ty waste collection / recycling cen‐
tre.
Ensure that your old appliance presents
no dange
r to children while being stor‐
ed for disposal.
To enable sorting by type of plastic for
r
ecycling, all plastic parts of the appli‐
ance are labelled with international
standard symbols.
To Next Page
Loading...
Need help?
General
