Miele G4920 User Manual

Problem solving guide
75
Water inlet fault
Problem Possible cause and remedy
The Inle
t/Drain indica‐
tor light flashes.
The tap is turned off.
 T
urn on the tap fully.
The dishwasher stops
during a programme.
The Inlet/Drain indica‐
tor light flashes.
Fault code  or  ap‐
pears in the display.
Before rectifying the problem, you must:
 Switch the dishwasher off with the  b
utton.
Water intake is restricted.
 T
urn on the tap fully and start the programme
again.
 Clean
the water inlet filter (see "Maintenance").
 The wat
er pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
Water drainage fault
Problem Possible cause and remedy
The dishwasher stops
durin
g a programme.
The Inlet/Drain indica‐
tor light flashes.
Fault code  appears
in the display.
Before rectifying the problem you must:
 Switch the dishwasher off with the  butt
on.
The water outlet is restricted.
Ther
e might be water in the wash cabinet.
 Clean
the filter combination (see "Cleaning and
care - Cleaning the filters").
 Clean
the drain pump (see "Maintenance").
 Clean
the non-return valve (see "Maintenance").
 Remove any ki
nk or loop in the drain hose.

Miele G4920 Specifications

General

Brand	Miele
Model	G4920
Category	Dishwasher
Language	English