Loading the dishwasher
31
Adjusting the upper basket
In order to gain more space for taller
pieces of crockery in the lower or upper
basket, the upper basket can be adjus-
ted on three levels with 2 cm between
each level.
The upper basket can also be set at an
angle with one side high and the other
side low. This can be useful to help pre-
vent water being left in deep dishes etc.
Ensure, however, that the basket can
be inserted smoothly into the cabinet. It
is better to adjust the basket before
loading it.
Pull out the upper basket.
To raise the upper basket:
Lift the basket up until it clicks into
place.
To lower the upper basket:
Pull upwards on the levers at either
side of the upper basket.
Adjust the basket to the desired
height and then push the levers se-
curely back down into position.
Depending on the setting of the upper
basket, the following plate dimensions
can be accommodated.
Dishwashers with cutlery basket
(see data plate for model number)
Upper
basket
level
Plate in cm
Upper basket Lower
basket
Stand-
ard
XXL
Top 20 24 31 (35*)
Middle 22 26 29
Bottom 24 28 27
Dishwashers with cutlery tray
(see data plate for model number)
Upper
basket
level
Plate in cm
Upper basket Lower
basket
Stand-
ard
XXL
Top 15 19 31 (35*)
Middle 17 21 29
Bottom 19 23 27
* When tilted, plates of up to 35 cm can be
accommodated (see "Lower basket).
To Next Page
Loading...
Need help?
General
