Programme options
51
Delay start
You can set the start time for a pro-
gramme, e.g. to take advantage of night
time electricity tariffs. The start time can
be delayed between 30 minutes and 24
hours.
The delay period is shown in 30
minutes increments for a delay period
between 30 minutes and 9 hours 30
minutes. It is shown in hours for periods
longer than this.
When using the Delay start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet,
powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully dis-
pensed.
Do not use liquid detergent when se-
lecting Delay start, as it can run into
the dishwasher before it is required.
To prevent children coming into
contact with dishwasher detergent:
add the detergent immediately be-
fore starting the programme, i.e. be-
fore activating Delay start with the
Start button. Then lock the door with
the safety lock.
Switch the dishwasher on with the
button.
The Start indicator light will flash.
Select the programme you want.
Press the button.
The last Delay start time used will ap-
pear in the display. The indicator
light will come on.
Set the required time using the
button.
If you keep the button pressed in,
the time will increase automatically up
to hours. To get back to .hours,
press the button twice.
Press the Start button.
The Start indicator light will come on.
To Next Page
Loading...
Need help?
General
