Cleaning and care
66
Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected and
cleaned regularly (approx. every 4 - 6
months).
Switch the dishwasher off.
Remove the spray arms as follows:
Take out the cutlery tray (if your dish-
washer is fitted with one).
Push the top spray arm upwards to
engage the inner ratchet. Then un-
screw the spray arm.
Push the middle spray arm upwards
to engage the ratchet. Then un-
screw the spray arm .
Remove the lower basket.
Pull the lower spray arm firmly up-
wards to remove it.
Use a pointed object to push food
particles into the spray arm jets.
Rinse thoroughly under running wa-
ter.
Replace the spray arms and check
that they rotate freely.
To Next Page
Loading...
Need help?
General
