Cleaning and care
65
To clean the inside of the filter, the flap
must be opened:
Press catches together in the dir-
ection of the arrows as shown, and
open the filter .
Rinse all the filters under running wa-
ter.
Then close the flap so that the catch
engages.
Replace the filter combination so that
it lies flat in the base of the wash cab-
inet.
Then turn the handle clockwise to
lock the filter combination in place.
Take care when you are fitting
the filter combination that it is se-
cured in position correctly.
Otherwise coarse soil could get into
the circulation system and cause a
blockage.
To Next Page
Loading...
Need help?
General
