,
The appliance must not be
operated until it has been correctly
installed in its housing unit.
Otherwise it poses an electric shock
hazard.
Important. Do not fit insulation
material inside the housing unit.
This would hinder the intake of air to
the appliance.
Turn off the mains electricity supply
to the isolator.
^
Connect the mains cable from the
oven to the isolator.
^
Push the appliance into the oven
housing unit and align it.
^
Open the oven door and, using two
screws, secure it to the side walls of
the housing unit through the holes in
the oven trim.
^
Reconnect the power supply to the
isolater switch.
Installing the oven
54
To Next Page
Loading...
Need help?
General
