Stainless steel coloured controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long. Remove
soiling straight away.
Avoid:
–
cleaning agents containing soda,
acids or chlorides,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers or
sponges which have been previously
used with abrasive cleaning agents,
– stainless steel cleaning agents,
– oven sprays.
If you are unsure about a particular
product or need further advice,
please contact your nearest Miele
Sales office. See back page for
details.
Accessories
Remove all accessories as well as
the runners and any extra
accessories such as, for example,
the baking carriage, or telescopic
runners from the oven interior before
starting the pyrolytic cleaning
process. The high temperatures
needed for pyrolysis will damage the
accessories and cause irreparable
damage to the baking carriage and
telescopic runners.
Baking tray, grill pan, anti-splash tray
(if fitted), racks and runners
The surfaces of these have been
treated with PerfectClean enamel.
Please refer to the section
"PerfectClean" for information on
cleaning and care.
Roasting filter
Clean in a solution of hot water and a
little washing-up liquid or in the
dishwasher.
If cleaned in the dishwasher, results are
better if the filter is placed horizontally
in the basket.
Some dishwasher detergents may
cause the surface of the metal filter to
discolour. This discolouration will not
affect the functioning of the filter in any
way.
The roasting filter, unlike other
accessories, can be pyrolytically
cleaned. Although this may cause
permanent discolouration, it will not
affect the functioning of the filter in any
way.
Cleaning and care
60
To Next Page
Loading...
Need help?
General