^ Insert the inner pane with the printed
text facing downwards.
Be careful that the side seals do not
slip and that the pane is pushed in as
far as possible.
^
Fit the trim with the seal in front of the
glass panes.
Make sure that the seal is sitting
correctly to prevent any steam
penetrating inside the door.
^
Put the guides back in position, then
tighten the screws in the trim.
To refit the door
^
Hold the door securely at both sides
and carefully fit it back onto the hinge
guides.
Cleaning and care
68
To Next Page
Loading...
Need help?
General
