To switch a programme off automatically you can either
enter the Duration or just the Finish time.
To switch a programme on and off automatically you have
three choices:
–
Enter the Duration and Finish time
–
Enter the Start time and the Duration
–
Enter the Start time and the Finish time
The time which has not been entered is calculated
automatically.
The Start time will be shown in the display up until the
heating elements are switched on.
During the course of the programme you can follow the
Duration counting down in the display.
At the end of the programme the message "Programme
finished" will appear in the display and the buzzer will sound.
Using the residual heat, Energy-save function
Shortly before the end of a set cooking time the oven
heating switches itself off automatically. The message "Energy
save phase" will appear in the display.
The residual heat in the oven is sufficient to complete the
cooking process.
The cooling fan continues to run, as does the hot air fan if a
"fan" setting had been chosen.
To alter a set cooking time
It is possible to check or change times entered for a cooking
programme at any time by calling up the relevant symbol.
To delete a set time
^
Switch off the oven.
If there is a power cut, all data entered will be deleted.
Entering a cooking duration
36
To Next Page
Loading...
Need help?
General
