To ensure adequate ventilation to the
oven once installed:
- provide a ventilation cut-out in
the housing unit as illustrated.
- do not fit a rear panel into the
housing unit.
- do not fit insulation material
inside the housing unit.
Turn off the mains electricity supply
to the isolator.
^
Connect the mains cable from the
oven to the isolator.
^
Push the oven into the furniture
housing unit as far as the oven trim,
and align it.
^
Open the oven door, and with two
screws secure the oven to the side
walls of the furniture housing unit
through the holes in the oven trim.
^
Reconnect the electricity supply to
the isolator.
The appliance must only be
operated when it has been built in.
Otherwise it poses an electric shock
hazard.
Installing the oven
75
To Next Page
Loading...
Need help?
General
