Miele H 5040 B User Manual

To dismantle the oven door
The oven door is made up of three
panes of glass and has vents at the top
and bottom.
When the oven is operating, air is
circulated through the door to keep the
outer pane cool.
If condensate has worked its way in
between the glass panes, the door can
be dismantled in order to clean in
between the panes.
When cleaning the glass panes
please follow the same instructions
given for cleaning the appliance
front.
Do not use abrasive cleaning
agents, sponges or brushes, as
these can scratch the surface.
These could damage the surface.
Scratches can also cause the glass
to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a towel).
Always remove the oven door before
dismantling it.
^
Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
^ Flip the glass pane retainers
outwards to open them.
You can now remove the inner and
middle panes.
Cleaning and care
55

Miele H 5040 B Specifications

General

Oven type	Electric
Oven thermostat range	300 °C
Total oven(s) interior capacity	43 L
Interior light	Yes
Timer type	Digital
AC input voltage	230 V
Cord length	1.7 m
Product color	Stainless steel

Weight and Dimensions

Depth	550 mm
Width	560 mm
Height	460 mm
Weight	33300 g
Interior dimensions (W x D x H)	416 x 413 x 250 mm