Miele H 5040 B User Manual

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
,
Do not attempt to open the appliance casing yourself!
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Problem Possible cause and remedy
The display is dark.
–
Check whether the time of day display is set so that it
does not show in the display (see "Settings % - Pi").
– Check whether the mains fuse has tripped. If it has not
tripped, contact a qualified electrician or Miele.
The oven does not
heat up.
– Check if the system lock has been activated.
– Check whether the mains fuse has tripped. If it has not
tripped, contact a qualified electrician or Miele.
The time of day or
"i2:00" is flashing in
the display.
There has been a power cut.
Confirm the time of day with the OK sensor, or reset the
time. You will have to enter programmed cooking
processes again.
A noise can be
heard after a
cooking process.
This is not a fault.The cooling fan continues to operate after
a programme has finished. It switches itself off once the
oven has dropped to a certain temperature.
Problem solving guide
61

Miele H 5040 B Specifications

General

Oven type	Electric
Oven thermostat range	300 °C
Total oven(s) interior capacity	43 L
Interior light	Yes
Timer type	Digital
AC input voltage	230 V
Cord length	1.7 m
Product color	Stainless steel

Weight and Dimensions

Depth	550 mm
Width	560 mm
Height	460 mm
Weight	33300 g
Interior dimensions (W x D x H)	416 x 413 x 250 mm