Operation
52
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
– Temperature
– Power level
– Duration
– Finish at
– Start at
Changing the temperature
You can permanently reset the
recommended temperature to suit
your cooking preferences by selecting
Other| Settings| Recommended
temps.
Select the or arrow sensor or
swipe to the right or left in the
area.
The target temperature appears in the
display.
Change the target temperature via the
navigation area.
The temperature changes in 5°C steps.
Confirm with OK.
The cooking programme will restart with
the new target temperature.
Changing the microwave power level
You can change the microwave power
level for the Microwavefunction and
for functions which use microwave power.
Select Other| Settings| Recomm.
power levels to permanently set the
recommended power level to suit your
personal cooking preferences.
Select the/W sensor.
The set microwave power level appears
in the display.
Change the microwave power level
via the navigation area.
You can set the following microwave
power levels: 80W, 150W, 300W,
450W, 600W, 850W, 1000W.
Confirm with OK.
The process will restart with the new
microwave power level.
Setting cooking durations
Cooking results can be adversely
affected if there is a long delay
between the food being placed in the
oven and the start of cooking. Fresh
food can change colour and even
spoil.
When baking, the cake mixture or
dough can dry out, and the raising
agents can lose their effectiveness.
Select as short a time as possible
until the start of the cooking process.
Example: You have placed the food in
the oven compartment, selected a
function and the required settings such
as the temperature.
By entering Duration, Finish at or Start at
via the sensor, you can automatically
switch the cooking programme off or on
and off.