Operation
62
Booster
The Boosterfunction is used to quickly
preheat the oven.
This function is turned on as the factory
default setting for the following
operating modes (Settings| Booster| On):
- Convection Bake
- Convection Roast
- Surround
- Auto Roast
- Moisture Plus
If you set a temperature above 210°F
(100°C) and the Boosterfunction is
turned on, a rapid preheating phase
heats the oven compartment to the set
temperature. The browning/broiling
element and the ring heating element
come on together with the hot air
blower.
Delicate items (e.g., sponge cake or
cookies) will brown too quickly on
the top if the Boosterfunction is
used.
Turn off the Boosterfunction for these
items.
Turning Booster on or off for a
cooking program
If you have selected the Booster|
Onsetting, you can turn the function off
separately for a cooking program.
On the other hand, you can also turn on
the function separately for a cooking
program if you have selected the
Booster| Offsetting.
Example: You have selected an
operating mode and the required
settings such as the temperature.
You want to turn off the Boosterfunction
for this cooking program.
Drag down the pull-down menu.
Booster is highlighted in orange.
Select Booster.
Depending on the color scheme,
Booster is highlighted in either black or
white.
Close the pull-down menu.
The Boosterfunction is turned off during
the preheating phase. Only the heating
elements for the selected operating
mode are used to preheat the oven
compartment.
Preheat
The appliance only needs to be
preheated in a few cases.
You can place most dishes in the cold
oven compartment to make use of the
heat produced during the preheating
phase.
If you have set a cooking duration, it
will only start to count down when the
target temperature is reached and you
have placed the food in the oven.
Start the cooking program
immediately without delaying the start
time.
Turning Preheat on
The Preheatfunction can be used with
any operating mode and has to be
turned on separately for each cooking
program.