Note for test institutes
105
Energy efficiency class
The energy efficiency class is calculated in accordance with EN60350-1.
Energy efficiency class: A+
Please observe the following advice when testing:
– Use the Gentle bake programme for testing purposes.
– During testing make sure that only those accessories required for the test are in
the oven cavity.
Do not use other accessories that might be available, such as FlexiClip runners
or catalytic enamelled panels such as side panels or roof liners.
– When calculating the Energy efficiency class it is important to keep the oven
door firmly closed.
Depending on test instruments used, the door seal function can be affected to a
greater or lesser degree. This can have a negative influence on test results.
This can be compensated for by pressing on the door. Where necessary suitable
technical measures can be used to assist. The door seal is not affected in nor-
mal everyday use.
Data sheets for household ovens
The data sheets apply to models described in this operating instruction manual.
To Next Page
Loading...
Need help?
General
